Quite frankly i am not the best programmer. Looking for some pointers or possibly even someone to help me get this part completed. It will be machined on a UMC 750 and I have full 5 axis programming capabilities within Mastercam 2020. I am having some major learning curves with the internal features and having a hard time figuring out how to attack this. I have some toolpaths that have gotten me to a decent point but i need to rough and finish the rest. Anything would help and would be greatly a
There are a lot of like-minded folks out here. You've found the place where most of us like to hang out.
I've been where you are at, and my advice is just to keep doing what you are doing. Make improvements where you can. Learn as much as you can. Help as much as you can. But always be looking to your own career and knowing when it is time to move on. I heard this phrase uttered once by a guy I really respect, and it stuck with me over the years: "To move up, you've got to move on". While I