Unsupported Operation types?

[djstedman]

I was wondering if anyone has a list of unsupported operation types and their  operation.Type ID's..

 

I would like to make sure that my net hook skips any operation type that isn't supported.. (or aren't implemented in the same way / have same properties as most op types)

 

From what I have found so far it appears that attempting to get tool information on a manual entry, transform, or trim operation will throw an exception, since these types of ops don't actually have tools of their own this isn't exactly surprising, however it would be nice to avoid the exceptions getting thrown.

 

Anyhow .. I was wondering if anyone has a list of these types of operations and their numeric ID's ..

 

I know the following already,

 

manual entry is 17

transform is 4

 

Any help would be appreciated, I will do some testing if necessary, but if someone else already has this information it could save me some aggravation..

 

 

 

[djstedman]

Figured I would add this since I just encountered it, Trim toolpath op type is 103

[Roger Martin from CNC Software]

The Operation Types supported by the NET-Hook API:

TP_CONTOUR                 = 1
TP_DRILL                        = 2
TP_POCKET                     = 3
TP_CIRCMILL                   = 18  // version 8
TP_THDMILL                    = 100 // version 9
TP_FACE                          = 102
TP_SLOTMILL                  = 105
TP_HELIX_BORE              = 106
TP_ROUT_MULTI_DRILL = 306