Mastercam 2022 Multiaxis Essentials eCourse - CEI

Buy Now
149.00 995.00

The Mastercam 2022 Multiaxis Essentials eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Essentials and Mill Advanced Training Tutorials or eCourses.

IMPORTANT: This course is a work in progress. The first 6 tutorials are updated to Mastercam 2022, tutorial 7-10 use the 2021 videos. These will be updated to 2022 shortly. 


The Multiaxis Essentials eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.


Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

NOTICE: This course is identical to the standard Mastercam 2022 Multiaxis Essentials eCourse. This version is simply to track sales through the CEI store.

Introduction
  1. Mastercam 2022 Workspace Video
    10:32
Tutorial 1
  1. Tutorial 1 covers Contour With Axis Substitution.

  2. 1. Intro
    0:54
  3. 2. Geometry Creation
    2:55
  4. 3. Machine Definition and Stock Setup
    1:07
  5. 4. Contour to Machine the Cylindrical Helix
    5:14
  6. 5. Contour to Machine the Conical Helix
    3:11
Tutorial 2
  1. Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.

  2. 1. Intro
    0:52
  3. 2. Machine Definition Stock Setup
    0:47
  4. 3. Drill the 4 Holes
    2:54
  5. 4. Drill the 8 Holes
    1:60
  6. 5. Engrave the Numbers
    3:05
  7. 6. Contour the Top Slot
    2:23
  8. 7. Transform Rotate the Remaining Slots
    1:51
Tutorial 3
  1. Tutorial 3 covers 2D High Speed Dynamic Mill with Axis Substitution, Contour with Axis Substitution, Swarf Milling, Drill, New Planes, and Toolpath Transform Rotate

  2. 1. Intro
    1:25
  3. 2. Machine Definition and Stock Setup
    0:47
  4. 3. Dynamic Mill to Rough the Teeth
    4:18
  5. 4. Contour the Tooth Walls
    3:55
  6. 5. Change Face
    2:03
  7. 6. Swarf Mill the Teeth
    3:17
  8. 7. Drill the Holes
    3:41
  9. 8. Machine One Slot
    3:20
  10. 9. Transform Rotate the Remaining Slots
    1:45
  11. 10. Machine One Flat Area
    3:25
  12. 11. Transform Rotate to Machine the Other Flat Area
    1:44
Tutorial 4
  1. Tutorial 4 covers Rotary 4-Axis.

  2. 1. Intro
    0:58
  3. 2. Machine Definition and Stock Setup
    0:49
  4. 3. Rotary with the Rotary Cut Method
    4:28
  5. 4. Rotary with the Axial Cut Method
    3:45
Tutorial 5
  1. Tutorial 5 covers Curve 5-Axis.

  2. 1. Intro
    1:32
  3. 2. Configure Tools and Stock
    0:56
  4. 3. Curve with Tool Axis Control To Point
    3:47
  5. 4. Curve with Tool Axis Control From Point
    2:56
  6. 5. Curve with Tool Axis Control to Plane
    2:19
  7. 6. Curve with Tool Axis Control to Chain
    2:06
  8. 7. Curve with Tool Axis Control to Lines
    2:36
Tutorial 6
  1. Tutorial 6 covers Swarf 5-Axis.

  2. 1. Intro
    1:09
  3. 2. Stock Model
    2:38
  4. 3. Swarf Using Two Rails
    4:17
  5. 4. Swarf Using Surfaces
    2:05
Tutorial 7 - 2021 Version
  1. Tutorial 7 covers Circle Mill 5-Axis and Multiaxis Link. Please note this is the 2021 video. 2022 will be coming shortly.

  2. 1. Intro
    2:30
  3. 2. Circle Mill Part 1
    5:56
  4. 3. Circle Mill Part 2
    2:50
  5. 4. Circle Mill Part 3
    2:16
  6. 5. Multiaxis Link
    2:09
Tutorial 8 - 2021 Version
  1. Tutorial 8 covers Flow 5-Axis. Please note this is the 2021 video. 2022 will be coming shortly.

  2. 1. Intro
    1:35
  3. 2. Flow 5 Axis Oriented to Lines
    7:08
  4. 3. flow 5 Axis Oriented to a Point
    5:17
  5. 4. Toolpath Transform Rotate
    1:57
Tutorial 9 - 2021 Version
  1. Tutorial 9 covers Multisurface 5-Axis. Please note this is the 2021 video. 2022 will be coming shortly.

  2. 1. Intro
    1:54
  3. 2. Multisurface Along a Line
    6:41
  4. 3. Multisurface Within a Boundary
    4:28
Tutorial 10 - 2021 Version
  1. Tutorial 10 covers the Deburr toolpath. Please note this is the 2021 video. 2022 will be coming shortly.

  2. 1. Intro
    1:43
  3. 2. 3 Axis Deburr
    5:12
  4. 3. 3+2 Axis Deburr
    2:41
  5. 4. 5 Axis Deburr
    2:06

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us