Mastercam X9 Mill Advanced eCourse

Buy Now
149.00 995.00

This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Essentials (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.

Note: The free home learning edition/demo software for this course has expired. You can still watch the videos and read the eBook but you will not be able to follow along unless you own a licensed version of Mastercam.

Introduction
  1. Getting Started
    8:49
Tutorial 1
  1. Tutorial 1 covers Surface Rough Pocket, Surface Finish Shallow & Surface Finish Contour toolpaths. 

  2. 1. Drawing and CAD Creation
    11:26
  3. 2. Setup Sheet, Machine Definition, & Stock Setup
    1:34
  4. 3. Rough
    5:38
  5. 4. Finish Surface Shallow
    6:09
  6. 5. Finish the Walls
    5:33
Tutorial 2
  1. Tutorial 2 covers Surface Rough Pocket, Surface Finish Parallel & Surface Finish Pencil toolpaths.

  2. 1. Drawing and CAD Creation
    14:21
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    1:50
  4. 3. Surface Rough Pocket
    4:54
  5. 4. Surface Finish Parallel
    4:22
Tutorial 3
  1. Tutorial 3 covers Stock Model, Surface HS Rest Roughing & Radial & Surface Finish Blend toolpaths.

  2. 1. Drawing and CAD Creation
    14:56
  3. 2. Setup Sheet, Machine Definition, and CAD Creation
    1:24
  4. 3. Change the Level and Turn off the Stock
    0:42
  5. 4. Surface High Speed Area Rough
    10:03
  6. 5. Stock Model
    0:53
  7. 6. Finish One Side of the Part
    6:31
  8. 7. Create Construction Lines
    1:41
  9. 8. Finish the Area
    4:45
  10. 9. Transform and Post
    3:11
Tutorial 4
  1. Tutorial 4 covers Surface HS OptiArea, Surface HS OptiRest, Surface HS Hybrid & Surface HS Scallop toolpaths.

  2. 1. Drawing and CAD Creation
    25:09
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    1:15
  4. 3. Rough and Stock Model
    7:15
  5. 4. OptiRough and Stock Model
    16:09
  6. 5. Finish and Post
    7:57
Tutorial 5
  1. Tutorial 5 covers Surface HS Core Roughing, Scallop, Spiral & Waterline toolpaths.

  2. 1. Drawing and CAD Creation
    27:30
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    1:40
  4. 3. Rough
    6:41
  5. 4. High Speed Scallop for Pocket
    3:59
  6. 5. Transform and Stock Model
    2:34
  7. 6. High Speed Spiral
    5:25
  8. 7. Finish the Walls
    4:36
Tutorial 6
  1. Tutorial 6 covers Surface HS OptiCore, Horizontal, Waterline, Raster & Pencil toolpaths.

  2. 1. Drawing and CAD Creation
    9:48
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    1:46
  4. 3. OptiRough and Stock Model
    7:41
  5. 4. Surface HS Horizontal
    2:56
  6. 5. Surface HS Waterline
    3:33
  7. 6. HS Raster
    3:41
  8. 7. HS Pencil and Post
    4:27
Tutorial 7
  1. Tutorial 7 covers Surface HS OptiArea, Rest Roughing, Surface Finish Scallop, Leftover & Project toolpaths.

  2. 1. Drawing and CAD Creation
    15:09
  3. 2. Setup Sheet, Machine Definition, and Stock Setup
    1:29
  4. 3. Dynamic OptiRough
    3:41
  5. 4. Surface HS Rough and Stock Model
    5:47
  6. 5. Finish Scallop
    3:39
  7. 6. Surface Finish Leftover
    3:30
  8. 7. Pocket and Surface Rough
    5:52
Exercises
  1. Exercises

  2. 2 Surface Blend
    1:44
  3. 3 Surface Blend
    1:06
  4. CPlane - Normal
    0:54
  5. Cplanes - Rotate
    1:59
  6. Cube
    5:10
  7. Curves
    1:14
  8. Draft and Extrude
    1:27
  9. Dynamic Plane
    1:10
  10. Fence Surface
    1:31
  11. Fillet Blend
    1:58
  12. Net Surface - 1
    0:25
  13. Net Surface - 2
    0:39
  14. Net Surface - 3
    0:58
  15. Net Surface - 4
    0:46
  16. Primitives
    2:04
  17. Ruled Surfaces
    0:51
  18. Surface Fillet
    1:34
  19. Surfacing - 1
    0:55
  20. Surfacing - 2
    0:41
  21. Surfacing - 3
    0:57
  22. Surfacing - 4
    1:06
  23. Surfacing - 5
    1:19
  24. Surfacing - 6
    0:36
  25. Surfacing - 7
    0:47
  26. Surfacing - 8
    0:43
  27. Surfacing - 9
    0:53
  28. Surfacing - 10
    0:47
  29. Swept - 1
    0:31
  30. Swept - 2
    1:20
  31. Swept - 3
    0:57
  32. Swept - 4
    2:33
  33. Trim Surface to Surface
    1:18
  34. Trim to Curves
    1:18

Reviews



maranatha4888

  • 5
   1 of 1 member found this review helpful 1 / 1 member

Very very good.

Share this review


Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us