Mastercam 2018 Mill Advanced eCourse

Buy Now

149.00 995.00

This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Essentials (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.

All videos in this eCourse are Closed Captions

Introduction

2 Surface Blend

1:03
3 Surface Blend

1:14
3 Fillet Blend

3:42
Create Curves

2:03
Draft and Extruded Surfaces

1:05
Dynamic Planes

4:03
Fence Surface

1:51
Fillet Surfaces

2:38
Net Surfaces - 1

0:45
Net Surfaces - 2

0:42
Net Surfaces - 3

0:41
Net Surfaces - 4

0:39
Planes by Normal

2:01
Planes from Geometry

2:18
Primitives

2:51
Ruled Surface

1:16
Standard Construction Planes

4:10
Surfacing 1 - Revolved

1:01
Surfacing 2 - Revolved

0:34
Surfacing 3 - Draft and Flat Boundary

1:09
Surfacing 4 - Ruled and Lofted

1:30
Surfacing 5 - Net and Flat Boundary

2:45
Surfacing 6 - Net

0:25
Surfacing 7 - Net and Transform Rotate

1:14
Surfacing 8 - Sweep

0:51
Surfacing 9 - Sweep and Flat Boundary

1:10
Surfacing 10 - Offset

1:27
Sweep Surface - Two Rails

0:46
Sweep Surface - 2 Across Contours, 1 Along Contour

1:34
Sweep Surface - Translate vs Rotate

1:11
Sweep Surface - Sweep, Curve at Edges, Flat Boundary

3:30
Trim Surface to Surface

1:60
Trim to Curves

2:45

Tutorial 1

Tutorial 1 covers Surface Rough Pocket, Surface Finish Shallow & Surface Finish Contour toolpaths.
1. Wireframe Creation

6:57
2. Solid Creation

4:28
3. Machine Definition and Stock Setup

0:55
4. Surface High Speed Area Roughing

6:56
5. Surface High Speed Horizontal Area

4:23
6. Surface High Speed Waterline

3:30
7. Post

0:56

Tutorial 2

Tutorial 2 covers Surface Rough Pocket, Surface Finish Parallel & Surface Finish Pencil toolpaths.
1. Wireframe Creation

10:12
2. Surface Creation - Part 1

8:13
3. Surface Creation - Part 2

8:46
4. Machine Definition and Stock Setup

1:01
5. Rough the Part Using Dynamic OptiRough

5:11
6. Finish using Surface High Speed Scallop

6:13
7. Finish the Corners Using Pencil

3:22
8. Post

0:45

Tutorial 3

Tutorial 3 covers Stock Model, Surface HS Rest Roughing & Radial & Surface Finish Blend toolpaths.
1. Geometry Creation

15:33
2. Machine Definition and Stock Setup

1:20
3. Stock Model #1

1:01
4. Surface High Speed Area Rough

5:55
5. STock Model #2 - After Roughing

0:37
6. Finish One Side with Surface High Speed Radial

2:35
7. Finish Using Surface Finish Blend

4:23
8. Toolpath Transform

1:51
9. Post

0:39

Tutorial 4

Tutorial 4 covers Surface HS OptiArea, Surface HS OptiRest, Surface HS Hybrid & Surface HS Scallop toolpaths.
1. Geometry Creation - Part 1

7:04
2. Geometry Creation - Part 2

4:50
3. Geometry Creation - Part 3

13:45
4. Machine Definition and Stock Setup

0:42
5. Dynamic OptiRough

4:04
6. Surface High Speed OptiRest

5:41
7. Surface High Speed Hybrid

3:44
8. Post

0:46

Tutorial 5

Tutorial 5 covers Surface HS Core Roughing, Scallop, Spiral & Waterline toolpaths.
1. Geometry Creation - Part 1

5:01
2. Geometry Creation - Part 2

23:37
3. Machine Definition and Stock Setup

0:57
4. Surface High Speed Area Rough

4:23
5. Finish One Pocket Using Scallop

5:34
6. Toolpath Transform

2:43
7. Stock Model After Finish the Pockets

0:42
8. Finish the Top using Surface High Speed Spiral

4:40
9. Finish the Walls Using Surface High Speed Waterline

3:11
10. Post

0:41

Tutorial 6

Tutorial 6 covers Surface HS OptiCore, Horizontal, Waterline, Raster & Pencil toolpaths.
1. Open the CAD File

3:06
2. Surface Creation

8:19
3. Machine Definition and Stock Setup

0:49
4. Rough using Surface High Speed OptiRough

6:23
5. Stock Model

0:41
6. Surface High Speed Horizontal

1:53
7. Surface High Speed Waterline

2:15
8. Surface High Speed Raster

2:55
9. Finish the Corners Using Pencil

2:12
10. Post

0:42

Tutorial 7

Tutorial 7 covers Surface HS OptiArea, Rest Roughing, Surface Finish Scallop, Leftover & Project toolpaths.
1. Open the CAD File

1:34
2. Surface Creation

13:58
3. Machine Definition and Stock Setup

0:50
4. Dynamic OptiRough

3:46
5. Area Roughing with Rest Material

3:27
6. Stock Model

0:37
7. Finish Using Scallop

4:21
8. Finish Surface High Speed Scallop with Trim to Stock

3:25
9. Pocket the Letters

2:08
10. Project the Pocket Toolpath

3:32
11. Post

0:57

Write a review

Your name
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

Fortune 0

November 4, 2020

Awesome l wish to study this 2018 advanced but due to lockdown l don't have money

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.