Mastercam 2020 Mill Advanced eCourse

Buy Now

149.00 995.00

This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Essentials (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.

All videos in this eCourse are Closed Captions

Introduction

Mastercam 2020 Getting Started

15:52

Tutorial 1

Tutorial 1 covers Surface High Speed Area Roughing, Surface High Speed Horizontal, Surface High Speed Waterline toolpaths.
1. Intro

0:52
2. Wireframe Creation

4:34
3. Solid Creation

3:39
4. Machine Definition and Stock Setup

0:43
5. High Speed Area Roughing

4:37
6. High Speed Horizontal Area

2:58
7. High Speed Waterline

3:28

Tutorial 2

Tutorial 2 covers Stock Model, Surface High Speed Area Roughing with Rest Material, Surface High Speed Radial, Surface Finish Blend, and Tool Transform Rotate.
1. Intro

1:20
2. Wireframe and Surface Creation

5:55
3. Solid Creation

5:40
4. Machine Definition and Stock Model

1:18
5. Area Roughing and Stock Model

5:27
6. Finish One Side Using Radial

2:54
7. Finish One Side Using Blend

3:41
8. Toolpath Transform Rotate to Finish the Other Side

1:38

Tutorial 3

Tutorial 3 covers Surface High Speed Dynamic Optirough, Surface High Speed Dynamic Optirough with Rest Material, Stock Model, and Surface High Speed Hybrid.
1. Intro

1:12
2. Wireframe Creation

10:50
3. Solid Creation

10:20
4. Machine Definition and Stock Setup

0:39
5. Machine the Cavity using Dynamic OptiRough

4:19
6. Stock Model After Roughing

0:35
7. OptiRough with Rest Material

4:60
8. Stock After OptiRest

0:48
9. Finish the Part with Equal Scallops

4:41

Tutorial 4

Tutorial 4 covers Surface High Speed Area Roughing, Stock Model, Surface High Speed Scallop, Toolpath Transform Rotate, Surface High Speed Spiral, and Surface High Speed Waterline.
1. Intro

1:05
2. Geometry Creation

23:13
3. Machine Definition and Stock Setup

0:59
4. Rough the Part

3:18
5. Stock Model After Roughing

0:41
6. Cover Holes

0:58
7. Finish the Top Using Spiral

4:01
8. Finish the Walls Using Waterline

3:05
9. Scallop One Pocket

5:14
10. Toolpath Transform Rotate to Finish the Remaining Pockets

2:14

Tutorial 5

Tutorial 5 covers Solid Extrude Create Body, Extrude Boss, Extrude Cut, Draft to Face, Constant Radius Fillet, Shell, 2D High Speed Dynamic Mill, Surface High Speed Dynamic OptiRough, Surface High Speed Hybrid, Surface High Speed Pencil, 2D High Speed Dynamic Contour.
1. Intro

1:14
2. Solid Creation

15:06
3. Core Model Creation

8:01
4. Machine Definition and Stock Setup

0:49
5. 2D Dynamic Mill

2:26
6. OptiRough

2:23
7. Hybrid

2:52
8. Pencil

2:31
9. Dynamic Contour

3:19

Tutorial 6

Tutorial 6 covers Surface commands such as Net, Loft, and Flat Boundary. Toolpaths such as 2D High Speed Dynamic OptiRough, Surface High Speed Scallop, Surface High Speed Pencil, Surface High Speed Project will be used.
1. Intro

0:56
2. Surface Creation

6:33
3. Machine Definition and Stock Setup

0:51
4. Dynamic Mill to Rough up to the Boss

3:58
5. OptiRough the Boss

2:24
6. Scallop to Finish the Core

3:39
7. Pencil to Finish the Sharp Edges

2:17
8. Project to Engrave the Letter

3:33

Exercises

Exercises
2 Surface Blend

0:52
3 Surface Blend

0:50
3 Fillet Blend

3:26
Create Curves

1:10
Cube

2:54
Draft and Flat Boundary Surfaces

1:10
Dynamic Planes

3:11
Fence Surface

1:36
Net Surface 1

1:55
Net Surface 2

0:31
Net Surface 3

0:31
Plane by Entity

1:31
Plane by Normal

1:34
Primitives

2:18
Revolved Surface

0:46
Surface Fillet

2:19
Sweep Surface

0:41
Trim to Curves

1:58

Write a review

Your name
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.