Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2021 Mill Essentials eCourse

Buy Now
149.00 995.00

This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities. 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 13 hours to complete.

All videos in the eCourse are Closed Captioned

Introduction
  1. Mastercam 2021 Getting Started Video
    10:06
Tutorial 1
  1. Tutorial 1 covers Facing, Circle Mill, Drilling, and Contour Toolpaths

  2. 1. Intro
    1:10
  3. 2. Wireframe Creation
    3:06
  4. 3. Machine Definition and Stock Setup
    2:25
  5. 4. Face the Part
    3:33
  6. 5. Circle Mill the Large Hole
    5:06
  7. 6. Circle Mill the Inner Hole
    2:59
  8. 7. Spot Drill and Drill the 4 Holes
    5:02
  9. 8. Chamfer the Large Hole and Corners
    6:44
Tutorial 2
  1. Tutorial 2 covers Aligning Parts in a Vice, Multiple Setups, Slot Mill, Pocket, High Speed Dynamic Contour, High Speed Dynamic Mill, and Contour Toolpaths

  2. 1. Intro
    1:25
  3. 2. Geometry Creation
    7:34
  4. 3. Merge the Vice
    4:36
  5. 4. Machine Definition and Stock Setup
    1:11
  6. 5. Slot Mill
    3:06
  7. 6. Machine the Cutouts
    3:47
  8. 7. Finish the Pockets
    3:33
  9. 8. Machine the Outside Profile
    4:18
  10. 9. Finish the Outside Profile
    1:37
  11. 10. Setup #2
    5:05
  12. 11. Face Setup #2
    2:47
  13. 12. Stock Model
    2:08
Tutorial 3
  1. Tutorial 3 covers 2D High Speed Dynamic Mill, Contour, 2D High Speed Area Mill, Transform-Rotate, and Drill toolpaths

  2. 1. Intro
    1:41
  3. 2. Wireframe Creation
    11:29
  4. 3. Solid Creation
    4:25
  5. 4. Machine Definition and Stock Setup
    0:45
  6. 5. Dynamic Mill the Step
    4:32
  7. 6. Contour to Finish the Walls
    2:14
  8. 7. Area Mill One Pocket
    4:23
  9. 8. Toolpath Transform Rotate to Machine the Remaining Pockets
    2:16
  10. 9. Contour to Finish the Walls
    2:49
  11. 10. Spot Drill and Drill the Holes
    5:04
  12. 11. Chamfer the Outer Diameter and Pockets
    4:58
  13. 12. Setup #2
    1:43
  14. 13. Area Mill and Contour the Bottom Pocket
    5:23
Tutorial 4
  1. Tutorial 4 covers Multiple Setups, 2D High Speed Area Mill, 2D High Speed Area Mill with Remachining Enabled, Drill, Chamfer Drill, and Thread Mill toolpaths

  2. 1. Intro and Open Geometry
    1:35
  3. 2. Machine Definition and Stock Setup
    0:41
  4. 3. Area Mill the Pocket
    3:44
  5. 4. Area Mill the Lower Pocket
    3:11
  6. 5. Remachine the Pockets
    2:38
  7. 6. Drill, Chamfer, and Tap the Four Holes
    6:44
  8. 7. Change WCS
    1:05
  9. 8. Drill the Holes in the Front View
    6:15
  10. 9. Thread Mill the Large Hole
    4:35
  11. 10. Machine the Left Side Slot
    4:38
Tutorial 5
  1. Tutorial 5 covers 2D High Speed Dynamic Mill, 2D High Speed Area Mill, 2D High Speed Blend Mill, and 2D High Speed Peel Mill

  2. 1. Intro
    1:01
  3. 2. Open the Wireframe and Create the Solid
    5:06
  4. 3. Machine Definition and Stock Setup
    0:39
  5. 4. Rough the Part using Dynamic Mill
    3:13
  6. 5. Area Mill the Step
    3:27
  7. 6. Blend Mill
    3:11
  8. 7. Peel Mill the Slots
    5:33
  9. 8. Chamfer the Edges
    3:19
Tutorial 6
  1. Tutorial 6 covers 2D High Speed Dynamic Mill, Feature Based Drilling (FBM Drill), Pocket, and Contour Toolpaths

  2. 1. Intro
    1:04
  3. 2. Geometry Creation
    10:43
  4. 3. Machine Definition and Stock Setup
    0:43
  5. 4. Area Mill the Pockets
    3:53
  6. 5. FBM Drill
    7:20
  7. 6. Dynamic Mill the Outside Profile
    3:15
  8. 7. Finish the Pockets and Outside Profile Using Contour
    4:58
  9. 8. Engrave the Letters
    2:58
Tutorial 7
  1. Tutorial 7 covers modifying vise geometry and aligning part geometry in the vise

  2. 1. Vice
    10:22
Exercises
  1. Exercises

  2. Analyze Chains
    5:39
  3. Analyze Commands
    5:17
  4. Break
    1:34
  5. Chaining
    5:38
  6. Create Arc Tangent
    1:44
  7. Create Arcs
    2:44
  8. Create Fillet
    1:34
  9. Create Line Tangent
    1:11
  10. Create Lines
    2:59
  11. Create Point Position
    2:03
  12. Create Rectangle
    2:12
  13. Managing Attributes and Levels
    2:39
  14. Transform - Mirror
    1:51
  15. Transform - Offset
    2:43
  16. Transform - Rotate
    1:32
  17. Transform - Translate
    1:59
  18. Trim
    2:29
Tool Library
  1. Description Summary

  2. 1. Create and Edit Tools
    5:29

Write a review


Guest


Fike.Programmer

  • 1
   3 of 4 members found this review helpful 3 / 4 members

with mastercam 2023  you have a new machine groups for mills making these mill courses nearly impossible to follow for people new to the software. which is precisely what these are designed to help with.

Share this review


Link to review
harold1121

  • 5
   6 of 8 members found this review helpful 6 / 8 members

Excellent Course WELL Explained and very in-depth for a Essentials course.

Well done to eMastercam !!!

Thank You 😀

Share this review


Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...