A lots of learning for me as a beginner. The instructor is fast explained, but can slowed down speed and pause to rewinds then repeat again to get better understanding. I enjoyed this lesson would watch again.
Mastercam 2022 Mill Essentials eCourse
-
-
-
-
-
Buy Now
149.00
995.00
This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities.
Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 13 hours to complete.
All videos in the eCourse are Closed Captioned
Introduction
-
Mastercam 2022 Workspace Video10:32
Tutorial 1
-
Tutorial 1 covers Facing, Circle Mill, Drilling, and Contour Toolpaths
-
1. Intro1:02
-
2. Geometry Creation3:03
-
3. Machine Definition and Stock Setup1:31
-
4. Face3:15
-
5. Circle Mill the Large Hole4:07
-
6. Circle Mill the Inner Hole3:06
-
7. Spot Drill and Drill4:47
-
8. Chamfer the Large Hole3:40
-
9. Contour to Machine the Corners3:08
Tutorial 2
-
Tutorial 2 covers Aligning Parts in a Vice, Multiple Setups, Slot Mill, Pocket, High Speed Dynamic Contour, High Speed Dynamic Mill, and Contour Toolpaths
-
1. Intro1:27
-
2. Geometry Creation8:51
-
3. Save the Vice as an Educational File1:30
-
4. Merge the Vice Geometry5:06
-
5. Machine Definition and Stock Setup0:41
-
6. Slot Mill5:06
-
7. Pocket3:45
-
8. Dynamic Contour to Finisht the Pockets3:26
-
9. Dynamic Mill the Outside Profile4:04
-
10. Contour to Finish the Outside Profile2:06
-
11. Stock Model0:53
-
12. Create Setup #23:07
-
13. Create the Soft Jaw Vice3:42
-
14. Merge the Part Geometry5:47
-
15. Merge the Soft Jaw Vice2:16
-
16. Face the Part3:59
Tutorial 3
-
Tutorial 3 covers 2D High Speed Dynamic Mill, Contour, 2D High Speed Area Mill, Transform-Rotate, and Drill toolpaths
-
1. Intro1:46
-
2. Wireframe Creation13:07
-
3. Solid Creation4:43
-
4. Machine Definition and Stock Setup0:41
-
5. Dynamic Mill the Steps4:14
-
6. Contour to Finsh the Walls2:49
-
7. Area Mill One Pocket3:41
-
8. Toolpath Transform Rotate2:15
-
9. Contour to Finish the Pocket Walls4:47
-
10 Spot Drill the Holes3:15
-
11. Drill the Holes2:27
-
12. Chamfer the Outside Diameter2:27
-
13. Chamfer the Pockets2:01
-
14. Create Setup #21:38
-
15. Area Mill the Bottom Pocket2:36
-
16. Contour to Finish the Bottom Pocket2:58
Tutorial 4
-
Tutorial 4 covers Multiple Setups, 2D High Speed Area Mill, 2D High Speed Area Mill with Remachining Enabled, Drill, Chamfer Drill, and Thread Mill toolpaths
-
1. Intro and Open Geometry2:06
-
2. Machine Definition and Stock Setup0:35
-
3. Area Mill One Pocket3:01
-
4. Area Mill the Lower Pocket3:07
-
5. Remachine the Pockets2:46
-
6. Drill the Top Holes2:37
-
7. Chamfer the Top Holes1:44
-
8. Tap the Top Holes2:12
-
9. Create Setup #21:15
-
10. Chamfer Drill the Front Holes1:27
-
11. Drill and Tap the Front Holes3:56
-
12 Drill and Tap the Large Front Hole4:08
-
14. Create Setup #31:07
-
15. Slot Mill the Left Side Slot3:04
Tutorial 5
-
Tutorial 5 covers 2D High Speed Dynamic Mill, 2D High Speed Area Mill, 2D High Speed Blend Mill, and 2D High Speed Peel Mill
-
1. Intro1:08
-
2. Solid Creation5:12
-
3. Machine Definition and Stock Setup0:49
-
4. Dynamic Mill3:39
-
5. Area Mill3:21
-
6. Blend Mill3:37
-
7. Peel Mill4:40
-
8. Model Chamfer3:34
Tutorial 6
-
Tutorial 6 covers 2D High Speed Dynamic Mill, Feature Based Drilling (FBM Drill), Pocket, and Contour Toolpaths
-
1. Intro1:14
-
2. Wireframe Creation5:58
-
3. Solid Creation3:17
-
4. Machine Definition and Stock Setup0:38
-
5. Dynamic Mill the Pockets3:16
-
6. FBM Drill6:41
-
7. Dynamic Mill the Profile2:28
-
8. Finish the Pockets2:17
-
9. Contour to Finish the Outside Profile2:30
-
10. Engrave the Letters2:34
Tutorial 7
-
Tutorial 7 covers modifying vise geometry and aligning part geometry in the vise
-
1. Vice10:22
Exercises
-
These exercises were recorded in Mastercam 2020. The instructions still apply to 2022.
-
Analyze Chains5:39
-
Analyze Commands5:17
-
Break1:34
-
Chaining5:38
-
Create Arc Tangent1:44
-
Create Arcs2:44
-
Create Fillet1:34
-
Create Line Tangent1:11
-
Create Lines2:59
-
Create Point Position2:03
-
Create Rectangle2:12
-
Managing Attributes and Levels2:39
-
Transform - Mirror1:51
-
Transform - Offset2:43
-
Transform - Rotate1:32
-
Transform - Translate1:59
-
Trim2:29
Write a review
sometime explanation is to fast if trying to test the process at the same time
i enjoy it for first lesson.
As a user from 9 years ago, this course quickly got me back up to speed. I read one other student found the video too fast to follow along. I too found this to be the case, but you can slow the speed of video to 75% or 50% and problem solved. Great course in my opinion.
MasterCam 2022 learning addition is no longer available, some dialogue box are totally different from the 2024 leaning addition and has caused me much confusion, especially because I am at the learning phase. I was wondering if there will be an updating parts of the videos where there are impactful differences?
Understanding Mastercam is difficult for a newbie like myself, especially when there are many upgrades from earlier version to the new one.