Mastercam 2022 Lathe eCourse

Buy Now

149.00 995.00

This eCourse is designed to familiarize you with the Mastercam user interface and provide the resources you need to become proficient with geometry creation and toolpaths for lathe applications. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, it will get you up-to-date and enhance your abilities.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 7 hours to complete.

Introduction

Mastercam 2022 Workspace Video

10:32

Tutorial 1

Tutorial 1 covers the Face, Roughing and Finish toolpaths.
1. Intro

0:60
2. Geometry Creation

3:52
3. Machine Definition and Stock Setup

4:04
4. Face the Part

3:52
5. Rough the Part

4:01
6. Finish the Part

2:34

Tutorial 2

Tutorial 2 covers Groove using Multiple Chains & Drilling toolpaths.
1. Intro

1:04
2. Geometry Creation

4:58
3. Machine Definition and Stock Setup

1:48
4. Face, Rough, and Finish the Part

3:18
5. Groove

4:41
6. Center Drill and Drill

3:36

Tutorial 3

Tutorial 3 covers Canned Rough & Finish toolpaths, Groove at an angle, as well as Custom Tool & Cutoff toolpaths.
1. Intro and Open Geometry

3:23
2. Machine Definition and Stock Setup

1:43
3. Face the Part

0:35
4. Center Drill and Drill

2:05
5. Canned Rough the ID

3:16
6. Canned Finish ID

1:38
7. Rough the OD

3:33
8. Groove the OD

4:59
9. Angled Groove

4:01
10. Finish the OD

1:54
11. Cutoff

2:02

Tutorial 4

Tutorial 4 covers ID Rough, Finish & Groove toolpaths.
1. Intro

0:55
2. Geometry Creation

3:05
3. Machine Definition and Stock Setup

1:13
4. Face, Rough, and Finish the OD

2:43
5. Center Drill and Drill

1:51
6. Rough and Finish the ID

2:31
7. Groove

2:22
8. Cutoff

1:13

Tutorial 5

Tutorial 5 covers the Thread toolpath and Stock Flip.
1. Intro

1:15
2. Geometry Creation

6:43
3. Machine Definition and Stock Setup

1:26
4. Face, Rough, and Finish

3:24
5. Machine the 1/2 - 13 UNC Groove

1:55
6. Machine the 1/2 - 13 UNC Thread

3:52
7. Center Drill and Drill

2:01
8. Stock Flip

1:04
9. Face, Rough, and Finish the Flipped Part

2:06
10. Machine the Grooves of the Flipped Part

1:58
11. Machine the 5/8 - 18 UNF Thread

2:16
12. Center Drill and Drill the Flipped Part

1:59

Tutorial 6

Tutorial 6 includes Stock Advance and Lathe Tailstock operations.
1. Intro

0:58
2. Geometry Creation

7:30
3. Machine Definition and Stock Setup

1:49
4. Face, Rough, and Finish

3:26
5. Machine the Relief Grooves

2:09
6. Thread

1:53
7. Custom Thread

5:24
8. Center Drill

0:41
9. Advance the Tailstock

1:01
10. Groove the Advanced Part

3:31
11. Cutoff

1:39

Tutorial 7

Tutorial 7 covers machining a part in a Vertical Turret Lathe (VTL machine). We will bring in a part from SolidWorks and manipulate the geometry appropriately within Mastercam.
1. Intro and Open File

2:51
2. Setup the VTL

3:46
3. Face, Rough, and Finish

2:40
4. Center Drill and Drill

3:39
5. Rough the ID

2:17
6. Groove the ID

3:04
7. Thread the OD

2:23

Exercises

Exercises
1. Analyze Chains

5:39
2. Analyze Commands

5:17
3. Break

1:34
4. Chaining

5:38
5. Chamfer Entities and Chamfer Chain

3:02
6. Create Arc Tangent

1:44
7. Create Arcs

2:44
8. Create Fillet

1:34
9. Create Line Tangent

1:11
10. Create Lines

2:59
11. Create Point Position

2:03
12. Create Rectangle

2:12
13. Join

1:60
14. Managing Attributes and Levels

2:39
15. Transform - Mirror

1:51
16. Transform - Offset

2:43
17. Transform - Rotate

1:32
18 - Transform - Translate

1:59
19. Trim

2:29

Write a review

Your name
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.