Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2022 Multiaxis Essentials eCourse

Buy Now
149.00 995.00

The Mastercam 2022 Multiaxis Essentials eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Essentials and Mill Advanced Training Tutorials or eCourses.

IMPORTANT: This course is a work in progress. The first 6 tutorials are updated to Mastercam 2022, tutorial 7-10 use the 2021 videos. These will be updated to 2022 shortly. 


The Multiaxis Essentials eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.


Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

Introduction
  1. Mastercam 2022 Workspace Video
    10:32
Tutorial 1

  1. Tutorial 1 covers Contour With Axis Substitution.

  2. 1. Intro
    0:54
  3. 2. Geometry Creation
    2:55
  4. 3. Machine Definition and Stock Setup
    1:07
  5. 4. Contour to Machine the Cylindrical Helix
    5:14
  6. 5. Contour to Machine the Conical Helix
    3:11
Tutorial 2

  1. Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.

  2. 1. Intro
    0:52
  3. 2. Machine Definition Stock Setup
    0:47
  4. 3. Drill the 4 Holes
    2:54
  5. 4. Drill the 8 Holes
    1:60
  6. 5. Engrave the Numbers
    3:05
  7. 6. Contour the Top Slot
    2:23
  8. 7. Transform Rotate the Remaining Slots
    1:51
Tutorial 3

  1. Tutorial 3 covers 2D High Speed Dynamic Mill with Axis Substitution, Contour with Axis Substitution, Swarf Milling, Drill, New Planes, and Toolpath Transform Rotate

  2. 1. Intro
    1:25
  3. 2. Machine Definition and Stock Setup
    0:47
  4. 3. Dynamic Mill to Rough the Teeth
    4:18
  5. 4. Contour the Tooth Walls
    3:55
  6. 5. Change Face
    2:03
  7. 6. Swarf Mill the Teeth
    3:17
  8. 7. Drill the Holes
    3:41
  9. 8. Machine One Slot
    3:20
  10. 9. Transform Rotate the Remaining Slots
    1:45
  11. 10. Machine One Flat Area
    3:25
  12. 11. Transform Rotate to Machine the Other Flat Area
    1:44
Tutorial 4

  1. Tutorial 4 covers Rotary 4-Axis.

  2. 1. Intro
    0:58
  3. 2. Machine Definition and Stock Setup
    0:49
  4. 3. Rotary with the Rotary Cut Method
    4:28
  5. 4. Rotary with the Axial Cut Method
    3:45
Tutorial 5

  1. Tutorial 5 covers Curve 5-Axis.

  2. 1. Intro
    1:32
  3. 2. Configure Tools and Stock
    0:56
  4. 3. Curve with Tool Axis Control To Point
    3:47
  5. 4. Curve with Tool Axis Control From Point
    2:56
  6. 5. Curve with Tool Axis Control to Plane
    2:19
  7. 6. Curve with Tool Axis Control to Chain
    2:06
  8. 7. Curve with Tool Axis Control to Lines
    2:36
Tutorial 6

  1. Tutorial 6 covers Swarf 5-Axis.

  2. 1. Intro
    1:09
  3. 2. Stock Model
    2:38
  4. 3. Swarf Using Two Rails
    4:17
  5. 4. Swarf Using Surfaces
    2:05
Tutorial 7

  1. Tutorial 7 covers Helix Bore

  2. 1. Intro
    3:35
  3. 2. Helix Bore the .531 Inch Holes
    5:23
  4. 3. Helix Bore the 3/4 Inch Holes
    2:57
  5. 4. Helix Bore the .7647 Inch Holes
    4:60
Tutorial 8

  1. Tutorial 8 covers Flow 5-Axis. 

  2. 1. Intro
    1:24
  3. 2. Flow 5 Axis to Finish a Blade
    4:14
  4. 3. Machine Simulation
    2:37
  5. 4. Flow 5 Axis to Finish a Fillet
    5:31
  6. 5. Toolpath Transform Rotate to Finish the Part
    1:43
Tutorial 9

  1. Tutorial 9 covers Multisurface 5-Axis.

  2. 1. Intro
    1:36
  3. 2. Multisurface Along a Line
    6:26
  4. 3. Multisurface With a Boundary
    4:01
Tutorial 10

  1. Tutorial 10 covers the Deburr toolpath

  2. 1. Intro
    1:26
  3. 2. 3 Axis Deburr the Top Edges
    3:36
  4. 3. 5 Axis Deburr the Angled Hole
    3:01

Write a review


Guest


Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...