Chook-development with MS Visual Studio.NET C++ ?

[MCHulk]

Hello MS-Visual-Studio- and Mastercam-Cracks,

 

is it possible to develop CHooks with the MSVS.Net C++. I tried to build a MFC-DLL-Project just like the "shapes"-project described in INTRO.DOC?

Compiling it, i get warnings and errors like "C4005: EXPORT:Makro redefinition" in M_VARS.H etc (I added the definitions _MSVC_ and MSWINDOWS).

What's the trick?

 

Thanks in advance,

MCHulk

 

[ 11-17-2003, 07:44 AM: Message edited by: MCHulk ]

[Bullines]

I'm not sure if .NET or .NET 2003 compilers can be used to develop C-Hooks (PDG should be able to clear that up for us), but...

 

If it's only a warning that you're getting, perhaps try undefining EXPORT before including m_vars.h:

 

code:

---

#undef EXPORT

---

[MCHulk]

Thank you Bullines,

 

if i convert VC-6.0-C-projects to .NET-C++ projects everything went good, and it will compile and link to the chook-dll i expect. But that works only with code without the MFC.

The EXPORT-warning is not the only one. Some errors C2143:Syntaxerror:Missing } before constant in M_ACONST.H: Line 33...

My intention is, that something with the defines is not correct.

But which one?

[Bullines]

Since these are C-Hooks and not C++-Hooks, did you make sure to use extern when including the Mastercam headers like this?

 

code:

---

extern "C"

{

#include "m_vars.h"

#include "m_init.h"

// and so on...

}

---

[MCHulk]

Yes i did.

[Bullines]

If you converted the project and it doesn't compile (but is possible to develope C-Hooks with .NET or .NET2003), there must be a few tweaks to the project settings that need to be added. I don't know what those are as I use the 6.0 compiler. Hopefully PDG can clear this up for us.