Coolant problem

[BijuGeorge]

Hi,

 

I am creating a new operation from my C-Hook and I am setting the coolant to either OFF, FLOOD, MIST or THRU-TOOL using CFLAG_COOL_OFF, CFLAG_COOL_FLOOD etc. as was advised here:

 

http://www.emastercam.com/cgi-bin/ultimate...t=000285#000000

 

Using this method the coolant is set only for some of the machines e.g. it works for "GENERIC HAAS 4X MILL.MMD", "MILL DEFAULT.MMD" and other GENERIC mills but for others it doesn't work e.g. for "MILL 3-AXIS HMC.MMD" and all 3,4, and 5 axis it doesn't. (I am using only milling machines)

 

The coolant dialog box for these two machine types also differs greatly from each other, can it be due to that. What should I do to set the coolant for any kind of machine?

 

Thanks

[BijuGeorge]

Forgot to mention that I am writing the C-Hook for Mastercam X2.

[gr]

We Onward Technologies Ltd,Pune are the reseller of Mastercam in India & SAARC region.If you have any queries,contact us on:[email protected],[email protected]

 

Thanks.

[gr]

Mr.Biju George,

 

What is your hardware lock no.?

 

Thanks.

[BijuGeorge]

Why would you ask my hardware lock number?