Horizontal B axis to post out "B0.0" in anyT/C plane

[mr801]

I did a search and couldn't find anything, But I remember reading about it somewhere. I am using the horizontal MPmaster post slightly modified for a Mori NH5000. I am wanting to have the post, post out B0.0 at every WCS, so for top WCS and T/Cplane right I want it to post "B0.0" in stead of "B90.0". I am using different workoffset numbers for each T/Cplane and control the B axis offset with machine. Just so I have a little more control on positioning if I need it. If anyone can point me in the right direction to mod the post or to the thread that covered this, that would be great! TIA.

[EX-wccprogrammer]

Find the following sections in your post:

 

pfcout           #C axis output
     cabs = 0   #ADD THIS LINE TO ALWAYS MAKE B0.0 OUTPUT
     if index = zero & rot_on_x,
       [
       if absinc$ = zero, *cabs, !cinc
       else, *cinc, !cabs
       ]
pcout           #C axis output
     cabs = 0   #ADD THIS LINE TO ALWAYS MAKE B0.0 OUTPUT
     if index = zero & rot_on_x,
       [
       if absinc$ = zero, cabs, !cinc
       else, cinc, !cabs
       ]

 

HTH (This came from a post for NH5000 btw)

[mr801]

Find the following sections in your post:

 

pfcout           #C axis output
     cabs = 0   #ADD THIS LINE TO ALWAYS MAKE B0.0 OUTPUT
     if index = zero & rot_on_x,
       [
       if absinc$ = zero, *cabs, !cinc
       else, *cinc, !cabs
       ]
pcout           #C axis output
     cabs = 0   #ADD THIS LINE TO ALWAYS MAKE B0.0 OUTPUT
     if index = zero & rot_on_x,
       [
       if absinc$ = zero, cabs, !cinc
       else, cinc, !cabs
       ]

 

HTH (This came from a post for NH5000 btw)

 

Awesome! Thanks EX!

[Guest CNC Apps Guy 1]

Or, your WCS could always be your view and your T/C Plane set to top. this won't issue an index to the post. Doing it that way preserves the logic to post out indexes at some point if you wanted to revert to the default.

 

HTH