Using OptiCore on X6 through SDK

[ashjo16]

Hello,

 

This is Ash,

 

In X6,is there a way to use OptiCore toolpath through X6 64bit SDK.?

 

The options provided in the X6 SDK are

// 0-Core roughing (pocket, out to in)

// 1-Area clearance (pocket, in to out)

// 2-Waterline (Z contour)

// 3-Constant stepover (scallop)

// 4-Horizontal (facing)

// 5-Raster (parallel)

// 6-Pencil (single and multipass)

// 8-Hybrid (waterline and scallop)

// 9-Spiral

// 10-Radial

// 11-Rough rest passes

// 12-Opt Rough

 

I think the OptiCore,OptiArea,OptiRest fall under the general category of No 12- Opt Rough

but when I use Opt Rough, it uses the OptiArea option automatically by default.

However I cant find an option which would allow me to use OptiRest.

 

Thanks for the help

Ashish

[Roger Martin from CNC Software]

I'm not exactly sure where you found that list of 3D HST toolpath type options.

In the X6 SDK, the list I see (in AssocVars_CH.h) has values for TP_OP_CORE 13, TP_OPT_REST 14 and TP_OPT_PROJECT 15

[ashjo16]

Thanks, we always used among the options listed under variable "MC_BYTE style"

in the file "AssocTyp_ch.h".

 

Thanks

Ashish