Mastercam rotary indexing

[cnc73]

I'm trying to make toolpaths in x8 that will work for rotary indexing on the x axis. I started with a solid model and translated the model so the origin is the center left side of the part. I tried making 2 different toolpaths and neither would index to the second hole. The first path I tried to translate/rotate the 0 degree toolpath to the next hole, no good. The second I tried making a new work offset at the new position, no good. What is the best way to set this up so it will work correctly? Thanks, Dan

[Guest]

Have you tried using the search function on the forum?

 

This has been covered many, many, many times....