Left Onrud Bought Omnitech - Help with a code

[Clappers]

The code on Omnitech m105 tells the machine to engage pusher bar.

 

Since we have 1000's of files from the Onsrud, as I send each one, I can manually put it in the code. However, is there a way on all new programs in Mastercam 7, to have the pusher bar as default?

 

Also, other than M105, can someone tell me the exact code to enter in existing programs.

 

(with Onsrud, we never dealt with codes, just draw, then save file. Operators took MCX file and sent to machine, so big learning curve having to work with .NC files.)

 

Thanks for any help. 

[thereclinerman]

thermwood user here. all of our m codes are put in by the post processor.  see about having the post processor modified to output the m codes as needed. your user manuel should list all m codes and their operation.