Tool library in Files tab not finding the right file 2017 HLE version

[sykes091]

Good day Y'all.  I have just being creating some parts on Mastercam 2017 HLE version and I had finished one part no problem and when I started the next part I could not bring up the tool folder.  I went to the the files tab under the machine group and it said the tool library was in the folder where I kept my projects, which is not correct.  I opened the previous project and saw that the tool library was in it's right spot in C/User/Public/Public Documents/ yada yada yada folder as is every other project I have made since installing it.  But now for some reason, even if I delete that project and start again it doesn't find that tool library.  I am about to uninstall/reinstall the entire program, but I thought I would throw this out here first for anyone who may have had the same problem and has a fix.  Thanks

 

STeve

[M Horton]

Click the icon directly to the right on the tool library under file tab, navigate to where the tool library actually is located and highlight it then click open. If the next time the tool library is again mislocated repeat the steps above but before clicking open, click the floppy disk icon at top of window(save to defaults) then click open. that should resolve it for the future.