On 2020/11/11 at AM12点11分, nickbe10 said:

最小最大z深度是在每次操作（以及最后）时计算的。

刀具表同样一次只能建立一个操作。

只需在工具表输出行中输出z min值即可。

Yes, I tried to make * Z_ Min input, but the result is not accurate, as shown in the figure. I've been confused for a long time, until now..

On 2020/11/11 at AM4点20分, crazy^millman said:

您吸引了他的时间和实力，然后回过头来自由分享工作，没有人阻止您。 祝你有美好的一天。

您占领他的时间和实力，然后自由地分享工作，没有人阻止您。 祝你有美好的一天。

Thank you for your guidance.

13 hours ago, crazy^millman said:

我怀疑他在过去10年中有将近2000个小时的工作时间。我严重怀疑他是否会分享它，但您永远不会知道。

好的，好可惜

16小时前，nickbe10说：

只需从Mpmaster开始。

Yes, I know that mpmaster can realize z-depth, but what I need is to implement it in the head tool table, which is more convenient. Can you help me?

Unfortunately, I am also looking for related posts on how to implement the Z depth of the tool table

Hello, according to your settings, my post-processing did not realize the drilling IJK output, but it did not report an error.

Friends, can you share your post processor? I like your post processor very much, thank you