Is G42 the correct output for Cutter Comp left when face milling on sub spindle of my Y AXIS Lathe? 

I have Left selected and verify looks right, but mastercam is posting out a G42.

First time for me...

Thanks for the help

I ended up fixing this. 
 

The g90 was screwing things up with the m45. Took that out and changed my t0101 to t0100 and the program was all set. 
 

thanks for your input. 
 

program is good to use after those two changes. if you want to warm up your machine especially if you have the same one this will work great.  Different machines just swap your m codes
 

i run a lot of parts with multiple dims that are held +\- .0002 so warming up the machine is pretty important for me 

I dont believe i do but i can give it an m43 to select main spindle cant think of anything else. Im going to try that and also throw in a g98 although i dont think thats the issue either. 

I’m in G59 when it alarms out. But i can check that out to see if theres anything odd going o

thanks for the replies if anyone has more info lmk

The machine is about a year old. Newest control as far as i know. 
 

What is the G10 L52 / L50? I have never heard of either and i dont see g10 in the book for my machine. 

Hello,

First Post on here. I have a chevalier FNL-220-LSY with fanuc  OI-TF control and am trying to create a warmup program. 

I use #3002 Parameter in my Johnford SV-40 mill to Move the table and Z for 5 min while Spindle is running at varied rpms. 

I am trying to write a program to do the same in my lathe but it keeps alarming out.

Alarm is PS0231 Illegal Format in G10 or L52

My program shown below alarms at the M45 line

%
O1111(DAILY WARM UP PROGRAM)
(DEFINE G59 AS MACHINE HOME LOCATION)

G00 G17 G20 G40 G80(PROGRAM START)
G59(Work offset for warm up)
G90

N5
G30 B0.
G30 W0.
G30 U0. V0.
T0101
N8 (SYNC SPINDLES) 
M45(MAIN SPINDLE C AXIS MODE ON)   ALARMS HERE
G28C0.0
G50C0.0
M17(SPINDLE LOCK)
G00C0.0
G50C0.0
M75(SUB SPINDLE A AXIS MODE ON)
G00A0.0
G50A0.0
M74(SUB SPINDLE A AXIS MODE OFF) 
M44(MAIN SPINDLE C AXIS OFF) 
G4U1.0(DWELL 1 SEC)
M79(SPINDLE SYNC ON) 
M110(SPINDLE PHASE SYNC ON)
G97S100M4 

N10(BEGIN LOOP)
#3002=0(RESET TIME)
WHILE [#3002 LE 5*.0167] DO1
S500M4; (500 RPM)
N101 G1X0Y0Z0F50
G30B0
G30W0
G30U0V0
X-8.0
Y-1.5
Y1.5
Y0.0
X0.0
Z-16.0
Z0.0
G30B0
G30W0
G30U0V0
(M98 O1111)
END1    

N20
#3002=0(RESET TIME)
WHILE [#3002 LE 5*.0167] DO1
S1500M4 (1500 RPM)
N101 G1X0Y0Z0F50
G30B0
G30W0
G30U0V0
X-8.0
Y-1.5
Y1.5
Y0.0
X0.0
Z-16.0
Z0.0
G30B0
G30W0
G30U0V0
(M98 O1111)
END1    

N30
#3002=0(RESET TIME)
WHILE [#3002 LE 5*.0167] DO1
S2500M4 (2500 RPM)
N101 G1X0Y0Z0F50
G30B0
G30W0
G30U0V0
X-8.0
Y-1.5
Y1.5
Y0.0
X0.0
Z-16.0
Z0.0
G30B0
G30W0
G30U0V0
(M98 O1111)
END1

N40
#3002=0(RESET TIME)
WHILE [#3002 LE 5*.0167] DO1
S3500M4 (3500 RPM)
N101 G1X0Y0Z0F50
G30B0
G30W0
G30U0V0
X-8.0
Y-1.5
Y1.5
Y0.0
X0.0
Z-16.0
Z0.0
G30B0
G30W0
G30U0V0
(M98 O1111)
END1    

N14
M44 (MAIN SPINDLE A AXIS MODE OFF)
M74 (SUB SPINDLE A AXIS MODE OFF)
M05(SPINDLE STOP) 
M80(SPINDLE SYNC OFF)
M111(SPINDLE PHASE SYNC OFF) 
G30B0
G30W0
G30U0V0
G90G54
M01
M30
%

If anyone wants my mill program id be happy to share it. Works great. 

I use the same code to sync spindles in other programs so I am pretty sure it is due to the 3002 parameter as it looks ahead but Im really not sure because its alarming way before it gets to that. 

ANY INPUT GREATLY APPRECIATED

THANKS

JOE