Hello everyone does anyone know how to generate cycle95 Stock Removal Cycle output from mastercam.

I m trying to generate post in this output format.
Loop format micro programming

G54 G21 G49 G0 G17 G40 G49 G80 G90
G91 G30 Z0.
T229 M6
G0 G90 G54 X-66.139 Y-49.768 S3500 M3
G5.1 Q1 P3 (ENABLE FINISHING)
G43 H229 Z20.
#100=10. (TOP OF STOCK)
#101=-2. (FINAL DEPTH)
#102=-0.5 (DEPTH OF CUT)
N100
G1 G90 Z#100 F3.6
G1 G90 X-66.139241 Y-49.767932
#100=#100+#102
X66.139
G5.1 Q0 (DISABLE FINISHING)
N200 #100=#100+#102
N210 IF[#100GE#101]GOTO100
N999G90G0Z100
M5
G91 G0 G28 Z0.
G28 Y0.
M30

I need to add in nc whether toolpath is OD or ID I got these 10214, 13794,17441,17442 parameters, but does anyone know, how to use it???

G17 G90
;M8
T12
M6
G0 X-115.14247 Y12. S1000 M3  D1
R1=10. ;(TOP OF STOCK)
R3=-2. ;(FINAL DEPTH)
R2=-2. ;(DEPTH OF CUT)
Z25.
AA:
G1 G90 Z=R1 F500.
X-103.14247 F1200.
G2 X-91.14247 Y0. CR=12.
G1 Y-38.92469
G3 X-85.14247 Y-44.92469 CR=6
G1 X85.14247
G3 X91.14247 Y-38.92469  CR=6.
G1 Y38.92469
G3 X85.14247 Y44.92469 CR=6.
G1 X-85.14247
G3 X-91.14247 Y38.92469 CR=6.
G1 Y0.
G2 X-103.14247 Y-12. CR=12.
G1 X-115.14247
G0Z20.
R1=R1+R2
IF R1>=R3 GOTOB AA
G90
M09
M05
M30

Here is the nc which running fine on machine.

hi,
does mp post support micro programming,

how to do it does anyone know?

Hello Gents,

How can I get feed value in mm/rev for Milling toolpath in lathe?

My output is in G98 I need to convert it into G99.