keedo
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by keedo
-
-
Thanks for the replys
I have not altered anything yet
Yes its a special character and its cumming from my tool library (tool comment)
I just hoped that i could add a line of code, instead of going trough all my tool library's and manual deleting the ( ø )
The thing is that in all my old tool library's i have given all my tools names like " ø12 r2 " ø for the Diameter.
The old Haas machines that we have no problem. But the new Haas machine don't like this ø character and errors out. Evan though its only a comment inside ()
-
Hello forum users
I have this problem when i post out my programme and i have this letter ø in the tool comment. Then when i load it at our Haas Machine it errors out, be course of this letter ( ø ) even its only a comment.
So is there a way to change the post so when it see the letter ( ø ) it will change it to something else or delete it?
Right now im using the Generic Haas 3X Mill post. That i downloaded on the Mastercam homepage
%
O0
(1)
(DATE=DD-MM-YY - 01-10-20 TIME=HH:MM - 15:00)
(MCAM FILE - Y:\JOB\JOB 2020\MASTERCAM\POST TEST.MCAM)
(NC FILE - X:\1.NC)
(MATERIAL - )
(T10|Ø12 R0,2 *60 ISCAR|H0|D0|TOOL DIA. - 11.99) ----The letter ø in this line neds to be deleted or changed to another letter ----
N100 G21
N110 G0 G17 G40 G49 G80 G90
N120 T10 M6
N130 G0 G90 G54 X399.005 Y-515.695 S10000 M3
N140 G43 H10 Z200.
N150 Z52..
tool comment
in Post Processor Development Forum
Posted
Thanks Zaffin_D
Exactly what i was looking for
"[^\x00-\x7F]"
You saved my day