daveb56
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by daveb56
-
-
Thanks Tim
I know the tapping cycle in the control but I'm trying to config. my post so I can do it with Mastercam X7 also.
Dave
-
I am looking for a rigid tapping cycle for an Anilam 6000M control on a Fryer HR 60 Horizontal mill.
Have tried Fadel & Fanuc posts and nothing seems to work. Does Anilam need different info than any one else.
Any help wold be greatly appreciated
THANKS.
Rigid tapping cycle for Anilam 6000 M
in Post Processor Development Forum
Posted
I'm using a Fanuc 3X post. It has been modified so the drilling cycles work but can't get the rigid tapping cycle to output in inches per minute based on RPM and threads per inch.Posted feed rate for a 1/4 -20 thread is F.050 and it needs to be F10.0
Also the post is not putting in an M3 or M4 to start the spindle.
I'm also working with my Mastercam re seller but thought maybe someone here had the same problem.
THANKS