![](https://www.emastercam.com/uploads/set_resources_9/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
earlybirdmg
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by earlybirdmg
-
-
How I remember it:
N1 #FX1 = 0.000
N2 #FY1 = 0.000
N3 #FZ1 = 0.000
N4 #FX2 = 0.000
N5 #FY2 = 0.000
N6 #FZ2 = 0.000
etc.
And they should be ok anywhere in the program.
I can double check some old programs when I get home if you don't get it by then.
I tried your suggestion and the program transfered without an error. When I looked at the fixture offset table the values weren't there. I'm guessing they didn't get written into the table.
-
Has anyone added Fixture Offsets at the end of a Fadal 88VMC program. The manual says to add FO #,X,Y,Z after the M30 but before the % sign. Tried it but error occured after control read the first FO line. The program uses subprograms so we tried adding FO lines after the last subprogram but got the error at the same place.
If anyone has any insigt it would be appreciated.
Fadal Fixture Offset
in Machining, Tools, Cutting & Probing
Posted
I tried your suggestion and the program transfered without an error. When I looked at the fixture offset table the values weren't there. I'm guessing they didn't get written into the table.