KEUTTLEY
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by KEUTTLEY
-
-
I still need "G84" for live tool tapping so I am not sure I want to replace. Any advice?
-
Hello All,
I have a Mori Seiki with a MSG 501 control. for tapping a hole my control uses "G32" and my post outputs "G84" which is reserved for live tools. I looked in the control definition and see tapping is on, but offers no option for what code to use.
Thanks in advance,
Kevin Uttley
-
I AM WORKING WITH X3 AND AM NOW AT A COMPANY THAT HAS A MORI SEIKI SL253 LATHE. THEY GOT THE POST YEARS AGO AND NEVER REALLY USED THE LATHE. WHEN EVER I DO A CUT OFF THE CODE M80 SHOWS UP IN THE POSTED FILE. I DO NOT HAVE A SUB SPINDLE SO THIS CODE IS NOT VALID. I HAVE SEACHED THE POST FILE LOOKING FOR THIS CODE AND HAVE BEEN UNABLE TO FIND. THIS IS JUST ONE PROBLEM. ALL OF MY CANNED CYCLES DO NOT FUNCTION AS THEY ARE SET FOR A FANUC CONTROL WHICH MORI HAS A VERSION OF, BUT DIFFERS SLIGHTLY IN CONTEXT. ANY HELP APPRECIATED.
THANKS ALL.
KEUTTLEY
Cut Off Detection
in Post Processor Development Forum
Posted
I RAN THE POST DEBUGGER AND ALL THAT APPEARS IS "ENCRYPTED POST" IS THIS WHY I AM UNABLE TO FIND THE '80' IN THE PST FILE?