Patrick Marthy
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Patrick Marthy
-
-
hi geirsj . i'm using laptop. on x9 (hle) I didn't have this prob. all other menu's are shown completely , only the stock setup properties menu has prob.
-
hi there .
i'm student of gcc and i'm using mastercam 2017 HLE . when i go to stock setup and hit the properties i can't see the full menu and it shows me only half of it. (lathe)
-
hi . I have the same prob.
I am student of GCC . learning mastercam . using master cam hle x9. and 2 days ago got this . The Demo/Home learning version expires in 9 days. I just want to no , are hle versions spose to be expired ?
problem with Doosan mill turn LYNX 2100LY
in Machining, Tools, Cutting & Probing
Posted
Hi everyone
I have a problem with Doosan mill turn LYNX 2100LY ,after a live tool operation I have tried to part off the part but the cut off tool is off center after tool change , when machine change the tool the tool is not at the center its coming more down about 0.3 or 0.5 inch . Is this a post processor problem or I need to change the machine setting ? when I'm doing just lathe every thing is ok , but when there is live tool operations in program only at that time the cut off tool goes off . I thing the live tooling program activating something in machine ( M code or...) because after that I have to turn off and on the machine to solve the problem , but again if I run a live tool program that issue will be back .
regards,
Patrick