u.p.t.
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by u.p.t.
-
-
It's in TOP in the stock setup page in properties in machine group. Same issue.
-
In Op-1 mastercam file, I finish turned , finish bored and machined few holes, mill pockets on front face of part, ran simulation and saved the end state as an .stl file to be used for op-2
In Op-2 mastercam file, In stock setup I brought that .stl file to work with. When I run the simulation it only shows Lathe turned and bored state and I do not see any holes and pockets that were machined in op-1.
Any comments ? Thanks
USING .STL FILE AS STOCK
in Machining, Tools, Cutting & Probing
Posted
It was already in TOP when I opened it.
On the main mastercam screen Op1 result.stl shows properly.
When I go to simulate the operations, it shows only the lathe turned part from op1, no milling