JonWayneSea
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by JonWayneSea
-
-
Sorry for the late response.
Attached is an example. If you post the code I think you'll see what I mean.
I've also attached the NC code and my "edited" code so you can see what I'd LIKE MasterCam to post.
I'm aware of the "blank tools" and some of the things I've tweaked for my posted code.
This issue is mainly the coolant and duplicate feed rate thing.
If anyone has any other suggestions to get the code to post like I've "edited" please let me know!
Thanks for the responses!
-
Hello all!
Having a bit of trouble since my company upgraded MasterCam earlier this year.
I'm doing programs strictly for our lathe department right now so this is geared towards that.
When I post my tool paths a couple things are happening that I've never had happen before.
1.) When doing any "roughing" cycles (i.e. the standard Lathe Rough cycle) my posted code has duplicate feed rates on every G1 line. It's always the same feed rate so I have to go in and edit it out by hand. It's annoying, but I use Cimco Edit to quickly delete duplicates in a specified selection.
2.) Any other type of Lathe Tool Path OTHER than the standard Lathe Rough cycle will not post an M8 code for coolant. It turns my coolant off at the end, but never on.
Any help would be appreciated!
Need help editing my Generic Lathe Post (MCAM 2020)
in Post Processor Development Forum
Posted
Yes. We have. It's not a straight answer and they have attempted to make us posts for a few machines and they were actually worse than the "default" MCAM posts.
If you can help me with the coolant and feedrate issue... That's about all I need.