On 7/8/2019 at 7:41 PM, gcode said:

Your Mastercam dealer should be your first point of contact for this problem

He should be able to provide you with a modern Siemens post at no charge as there is one available

on the Tech Exchange at Mastercam.com

Okay I see now, if there is free one available, that should also be fine, no need to migrate this file.

Thanks for the info, didn't now that.

Hi, can somebody with good resources help me to migrate this Siemens post-processor to Mastercam X9.

I found this file post online, but it seems like it's an older version.

I tried to migrate it to X9, unfortunately Mastercam X9 only recognize X7 & X8 only, it failed to do it.

Request some assistance on this one.

Siemens 3X.pst