Ariful Islam
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by Ariful Islam
-
-
Hey guys i'm using MasterCam 2018.
I am Newbie in MasterCam .
My machine control is Siemens (Sinumerik 808D milling). When i generate post processor there exist some command like Workpiece(" "), SUPA etc,
My machine 'Sinumerik' doesn’t support these command, that why i don’t want these command in my post processor.
Now my question is which parameter should i change in MasterCam to omit these Command?
-
Hey guys i'm using MasterCam 2018.
I am Newbie in MasterCam .
My machine control is Siemens (Sinumerik 808D milling). When i generate post processor there exist some command like Workpiece(" "), SUPA etc,
My machine 'Sinumerik' doesn’t support these comman, that why i don’t want these command in my post processor.
Now my question is which parameter should i change in MasterCam to omit these Command?
-
Thank you
-
Hey guys i'm using MasterCam 2018.
I've drawn 60 m.m long wrench, can i drag this drawing to 100 m.m long keeping aspect ratio without redrawing?
Can anyone give me any tutorial if possible?
-
In mastercam lathe threading operation when i input 0.25 on 'amount of first cut' under thread cut parameters' Tab, the generated code is G76 Q....R...
G76 X... Z...P... Q2500 F...
e.g Q2500 (in second block). I think it should be Q250
Moreover i want P value (in second block) in four digit, but mastercam always make it five digit, why?
What setting should i change to make Q250 in mastercam? And P value in four digit?
Can anyone help me?
Note: Mastercam setting is in metric unit and Fanuc 2X lathe control.
How to setup custom post processor in Mastercam 2018
in Post Processor Development Forum
Posted
This is Zip2Go file.
ZIP 2GO.ZIP
Zip2Go file
ZIP 2GO.ZIP