Strang feed rate

[odessa]

Hi, every body.

Below program which done for CNC Lathe with live tooling and Y-axis. It's face milling operation.

What do I have to change in a post processor to fix so strange feed rate. My feed rate in operations manager 40 in/min.

 

G0 G40 G80 G53 Z0 X0 T0

G54

N5 T0505

G17 G98

M154

G0 C-277.225

G0 X3.6245 Y0. Z1.

G97 S3000 M133

Z-.8843

G1 Z-1.2305 F100.

G41 X2.7515 C-281.197 F352.88

X2.7147 C-281.481 F579.49

X2.68 C-281.872 F795.34

X2.6482 C-282.366 F1007.76

X2.6199 C-282.958 F1206.69

X2.5958 C-283.638 F1385.87

X2.5763 C-284.392 F1538.1

X2.541 C-286.302 F1655.46

X2.5154 C-288.311 F1741.63

X2.4998 C-290.388 F1801.7

X2.4946 C-292.501 F1832.58

X2.4998 C-294.615

 

Please help.

 

Thanks to everybody.

[Chris McIntosh]

The feed rate being output is deg/min rather than units/min. If your machine automatically performs the calculation for you, you can modify the post to output the programmed feed rate rather than performing the calculation.

 

Basically at the bottom of the pfclc_deg_inv you could add a feed = fr_pos$ line if that's what you need.

[odessa]

Thank you so much. It works