Add any ANSI character in the text of the program.

[NikSpb]

Add any ANSI character (for example, the character ") in the text of the program.

I need to output a string enclosed in quotation marks. And do it with using the postprocessor.

Thanks.

 

For example:

This is macro-code for my CNC-machine:

 

_maske _haupt, 0, 0, "Submakro Beschreibung";

 

In quotes to enclose the string which is a variable!

 

Image for Example:

double quotes after D0.5000

[Jeremy Grigsby]

Can you just do a "manual entry" under toolpaths? It allows you to output manual code or comments. Not sure exactly what you are trying to do.

[NikSpb]

Can you just do a "manual entry" under toolpaths? It allows you to output manual code or comments. Not sure exactly what you are trying to do.

In quotes to enclose the string which is a variable!

[NikSpb]

I found it!

To display the symbol " in G-codes need in post to write: ' " ' !!!

[djstedman]

Oh .. wasnt sure what you were looking for.. if your using MPMaster based post.. there is this variable defined as well, and well you could always define one in your post even if

you werent using a MPMaster based post..

 

 

sdq	  : '"'			 # Contains a Double Quote character

 

Which could be less confusing to look at when typing long lines..

[Roger Martin from CNC Software]

You can always just specify the ASCII code number for the character you wish to output.

 

34 -> "

 

_maske _haupt, 0, 0, 34, Submakro Beschreibung, 34

 

This is the only way to output the "#" character (which is code 35)

 

http://www.asciitable.com