insert Block skip "/" in Toolpath Transform

[AndrewNg]

I am not sure if this had asked before, but i could not find any solution

I have edit "Generic Fanuc 3X Mill.pst" and every thing work fine on my machine, but I want to post "/' on toolpath transform to run setup part

Now my post look like this 

Quote

O0002(T)
G20
G0 G17 G40 G49 G80 G90
N1 T1 M6
G0 G90 G54 X-.6461 Y.5672 S4584 M3
G43 H1 Z.5 T2
M8
M98 P0101
G90 G55 X-.6461 Y.5672 Z.5
M98 P0101
M5
M9
G91 G28 Z0.
M01
;
N2 T2 M6
G0 G90 G54 X-.6461 Y.5672 S4584 M3
G43 H2 Z.5 T3
M8
M98 P0102
G90 G55 X-.6461 Y.5672 Z.5
M98 P0102
M5
M9
G91 G28 Z0.
M01
;
N3 T3 M6
G0 G90 G54 X-.6461 Y.5672 S4584 M3
G43 H3 Z.5 T1
M8
M98 P0103
G90 G55 X-.6461 Y.5672 Z.5
M98 P0103
M5
M9
G91 G28 Z0.
G30 X0. Y0.
M30
 
O0101
G99 G81 Z-.05 R.5 F4.59
X1.049 Y.651
X1.0264 Y-.941
X-.5462 Y-.8991
G80
M99
 
O0102
G99 G83 Z-1. R.5 Q.1 F4.59
X1.049 Y.651
X1.0264 Y-.941
X-.5462 Y-.8991
G80
M99
 
O0103
G95
G99 G84 Z-.6 R.5 F.05
X1.049 Y.651
X1.0264 Y-.941
X-.5462 Y-.8991
G80
G94
M99

but I want to post something like this 

Quote

O0002(T)
(the program will use G54, G55)
G20
G0 G17 G40 G49 G80 G90
N1 T1 M6
G0 G90 G54 X-.6461 Y.5672 S4584 M3
G43 H1 Z.5 T2
M8
M98 P0101
/G90 G55 X-.6461 Y.5672 Z.5
/M98 P0101
M5
M9
G91 G28 Z0.
M01
;
N2 T2 M6
G0 G90 G54 X-.6461 Y.5672 S4584 M3
G43 H2 Z.5 T3
M8
M98 P0102
/G90 G55 X-.6461 Y.5672 Z.5
/M98 P0102
M5
M9
G91 G28 Z0.
M01
;
N3 T3 M6
G0 G90 G54 X-.6461 Y.5672 S4584 M3
G43 H3 Z.5 T1
M8
M98 P0103
/G90 G55 X-.6461 Y.5672 Z.5
/M98 P0103
M5
M9
G91 G28 Z0.
G30 X0. Y0.
M30
 
O0101
G99 G81 Z-.05 R.5 F4.59
X1.049 Y.651
X1.0264 Y-.941
X-.5462 Y-.8991
G80
M99
 
O0102
G99 G83 Z-1. R.5 Q.1 F4.59
X1.049 Y.651
X1.0264 Y-.941
X-.5462 Y-.8991
G80
M99
 
O0103
G95
G99 G84 Z-.6 R.5 F.05
X1.049 Y.651
X1.0264 Y-.941
X-.5462 Y-.8991
G80
G94
M99

thank you.

[H.tom]

The following changes are only valid for the "Toolpath Transform --> Translate" operation:

[AndrewNg]

wow, it works perfectly. Thank a ton