Set Up Sheet

[roglesbee71]

I am trying to modify our set up sheet to print only the tools that are non- resident. Tools 1-110 are resident to the machines and only want to print the tool build information that are >110 on the set up sheet.

Also, anyone able to show the inspection tools on the set up sheets without creating a toolpath?

[SuperHoneyBadger]

There are a few knowledgeable folks here that can help you out, welcome.

Let us know what version you're on, and how you're creating your setup sheets now. If you're using the sheets included in your post, or using Active Reports, the advice will be quite different. Knowing some more about your situation will net you some answers, or at least a nudge in the right direction!