MPMaster Min/Max Z

[Paul McGarr]

quote:

---

So...You wish to be able to output X,Y,Z limit info within the toolable at top of the file ?

---

Roger,

 

You're the man. Thanks so much for the mod. I'll get this integrated into my post as soon as I get the time to make the edits.

 

This is exactly what I was looking for with the added value of X and Y.

 

Very, verry nice!

 

Paul

[AlbertZini]

So...

 

You wish to be able to output X,Y,Z limit info

Within the toolable at top of the file ?

and/or

At each toolchange?

And also have the overall program limits ?

 

See XYZ_LIMITS.ZIP

(In the "/Mastercam_forum/Text_&_post_files_&_misc/" folder of the FTP site)

 

Roger Martin could you show how to conclude the depth in one line

 

 

%

O1111

(DATE - MAR-30-13)

(TIME - 12:51)

(T20 | 5.0 CENTER DRILL | H20 | D20 | Max_Z = 5. Min_Z = -.3)

(T12 | 3.8 DRILL | H12 | D12 | Max_Z = 5. Min_Z = -2.392)

(T13 | 6.25 DRILL | H13 | D13 | Max_Z = 5. Min_Z = -3.128)

(PROGRAM AXIS LIMITS)

(Max_Z = 5. Min_Z = -3.128)

G00 G17 G21 G40 G80 G90

.....

.....

[kh012]

take a look at the post for the MILL2.SET for the set up sheet. i followed how this post buffers the depths

and puts them in the setup sheet. then i copied that buffering into my post. had to add an extra variable

for the output in second buffer. this does it per tool. not a table at the begining. but you should be able to add it.

the mpaster post already does this but adding another variable to captue the value might help

 

HTH Ken

[AlbertZini]

Thank you all, I did it

[kh012]

axelzu , care to share what your solution was?

 

Ken

[AlbertZini]

I found a knowledgeable person who develops post processors

and he told me how to do it

create sudptooltable and write him in ptooltable