Post NC Overwrite not updating

[Chris Rizzo]

Tried this on two different computers and a few files, and it reacts the same.

 

-Post some ops and click overwrite

-Select some different ops to post and re-click post/overwrite

 

When I do this, my nc file doesn't get updated or overwritten, the first ops that I post just get re-posted.

 

editor is mastercam and communications are mastercam external. This is bad bad bad when sending to machine and having a previous nc file sent! If you have "ask" clicked and rename the .nc, then it updates.

[Carl Hessig]

I keep ask and edit on. If I use overwrite it just adds another (.) before the ext.

T1.nc

T1..nc

 

Carl

[Mick from CNC Software Inc.]

I believe this was a bug and was addressed in MR1

[SLJ]

I just had the same problem only with Cimco as the editor. Posted the same file several times with minor changes and had both nci and nc checked as ask. My post is built so it asks for part # and rev # before finishing posting. After the 1st complete post, I caught that it did not ask for the #'s and checked on the changes I'd made. They were not current. Deleted the .nc file and reposted, worked that time. This is the 1st time I've seen this.

I just checked for updates, and it reported no new updates available.