drilling entities, arc vs circles

[beej]

I wish that when you pick "entites" in the drilling geometry, that it made no difference if the arc is closed or not. why would you drill at the endpoint of an arc? That seems like a rare thing compared to drilling at the center of an arc. The problem is sometimes the arcs look like circles but are not.

 

Am I alone in this or do others wish it was changed?

[Guest]

Thanks Roger Martin

 

quote:

---

FYI...

A change has been made to Drill Point Selection for MR1.

Now when you use the Entites selection method and tag an Arc - you always get the center point, never the end points of the arc.

---

Linky

[beej]

shoulda searched first.

 

thanks, John