X-Wire "change at point" selecting.

[Timmy]

Hello,

 

Can anyone tell me if you could or how do you multiple select entities in 'change at points' for X-Wire as you could in MC9.1?

(Tool Path Manager --> Geometry icon --> Chain Manager --> right click --> change at point)

 

Thanks,

Timothy N.

[Guest]

are you wanting to make changes along your wirepaths .i'm not sure what you are wanting to do.

 

del

[Roger Martin from CNC Software]

Tim,

 

You cannot do that "right now".

What are you dong that you need/want to do multiple points at the same time?

[Timmy]

Roger,

 

What I'm doing is in certain profile of a die section with back taper of 1 degree, there are areas which require no taper (straight cut). Therefore these are the entities that I have to go in and change the taper degree to zero and I want to do multiple select & change all at once as I was able to do in MC9.1 version. Please advise if there's better way of doing it.

 

Thanks,

Timothy N.