MR1 Screwing Up My Posts!

[Ron_Roy]

Hello All,

I think this is a familiar problem - after updating to MR1 all of my drilling code has been adversely affected. I have seen this posted a few times, but other than people recommending looking at my upload.log, nothing has helped solve the problem. What can I do to correct the drilling errors other than to go back to pre-MR1?

This is what it looks like:

%

O8888

N100G99G81X-.769Y.1083Z-.125R.1F5.76

N110X-.6011Y.2491

N120X-.3737Y.2599

N130X-.2329Y.1354

N140X-.1137Y-.0271

N150X-.0487Y-.1462

N160X.287Y-.1949

N170X.3953Y-.0975

N180X.4928Y.065

N190X.5361Y.2491

N200X.704Y.2924

N210X.8502Y.2004

N220X.9423Y-.0162

N230Y-.1083

N240X1.0181Y-.3141

N250X1.1805Y-.1949

N260X1.083Y.3249

N270X.8664Y.5469

N280X.3195Y.796

N290X-.1246Y.8827

N300X-.4332

N310X-.7798Y.6715

N320X-.9043Y.417

N330X-.9802Y.2924

N340X-.8935Y-.2383

N350X-.8069Y-.3466

N360X-.6228Y-.4765

N370X-.3412Y-.5794

N380X.2383Y-.6607

N390X.5415Y-.7365

N400X.7419Y-.6932

N410X.9098Y-.639

N420G80

(PROGRAM NAME - MACHINE_GROUP_1)

(DATE=DD-MM-YY - 06-03-06 TIME=HH:MM - 16:04)

(X & Y ZERO: )

(Z ZERO: )

(COMMENTS: )

(UNPROVEN PROGRAMS - INITIALS: )

( )

( )

(1/8 DRILL TOOL - 2 DIA. OFF. - 42 LEN. - 2 DIA. - .125)

N430G20

N440G0G40G49G80G90

N450G91G28Z0.

N460G28X0.Y0.

N470G54

N480T2M6

N490G0G90X.9098Y-.639S4000M3

N500G43H2Z.1

N510M5

N520G91G28Z0.

N530G28X0.Y0.

N540M30

%

Before the "UPGRADE" it was posting just fine.

HELP!!

Thanks,

Ron

[Paul Decelles]

Set rpd_typ_v7$ to 0 in your post.

[Guest]

Ron Roy.

quote:

---

but other than people recommending looking at my upload.log

---

Instead of coming back and complaining how people did not lead you by the hand to solve your problem, when you could have done just a "little" checking.

 

This is the thread you first posted about your problem.

Linky #1

 

You posted on "posted 12-16-2005 02:09 PM"

 

Here we are nearly 3 months later, if you simply followed the link I provided, you found I suggested someone check their log, right under my post was and is the same answer that Paul gave you today.

 

A little due dilligence on everyones part will get us all a long way.

[Ron_Roy]

Hey John,

I apologise for my outburst - it was at the end of a long, frustrating day. I don't want you to think I don't appreciate your help.

Actually three months ago we were so busy that I deleted the update and reverted to the original MCAM X so I could continue with the job - so I didn't return to check the posts.

Then my reseller sent me MR1 and I loaded it thinking the bugs were fixed. They were not, so I went back to the Forum and ended up following other links which were supplied and felt like I was chasing my tail....and my forum post was born.

Anyway, I'll try to edit my post tomorrow when I get to work.

Thanks Guys,

Ron