Dirty operation won't regen

[Joeyls319]

Morning all

 

I seem to be having some difficulty regening a drill operation in "X". I brought opened a mc9 file in "X" so all my toolpathes would be there. Then I just change the machine. This has been working pretty good for me. From there I just do my new toolpathes and all is good in the world. But today I some of the previous drill operations became dirty and I can't regen them.

 

I tried to repick the points and that didn't work.

I tried creating a new tool and that didn't help.

 

Anyone got any ideas?

 

Thanks

 

Joey

[Joeyls319]

I also can not backplot any of my previous contouring operations. The geometry is there but it does nothing when I try to backplot them.

I'm pretty sure I have done this before. and

[Joeyls319]

I got it to work.

 

I had to exit out and then get back into Mastercam. After that it let me regen.

 

Have to keep that in mind incase it ever happens again.

 

Joey