Eztrak post output

[Leif Johnson from MICO Inc]

Hello. Is it normal for the V9 converted to X post to output tool changes @ the end of the operation? My program starts with a tool change then does some contour ops. Then I do some drilling ops. followed by another contour path. All drilling ops have the toolchange after the drill points. My final contour toolchanges at the beginning of the op.

 

Please let me know if this makes any sense.

 

Thanks

Leif

[Paul Decelles]

Set rpd_typ_v7$ to 0 in the post.

[Leif Johnson from MICO Inc]

Thanks Paul for the quick response. It worked perfectly!

 

Thanks again,

Leif