Graphics viewkduring verify

[stickgc]

I'm stumped, I haev compared settings between my v9 and the two others in the office that have no problem.

 

 

What problem you ask, While in verify of a toolpath I try to zoom in and look closer at the sheet I receive a message saying

Changing the Graphics view is not allowed at this time.

 

any thoughts,

 

thanks

 

gc.

[Guest]

Are you using True Solid verify?

 

Try toggling that off and on and see if it helps.

 

Also if your' doing a 4/5 th axis verify with out the add-on you'll get that exact error

[stickgc]

thank you I did not have true solid turned on.

 

Thanks

 

G.C.

 

Overlooked it in my compare!!!!