Heidenhain post

[IZN]

We recently got version X.

I'm struggling with it but little by little

I'm figuring it out.

One thing I can't seem to figure out is when

I updated my Heidenhain post it started to do

something strange.

It used to output the "Datum Shift" at the beginning of the program. Now it puts it after the drilling cycle.

Does anyone know what I could do to fix this problem?

Thanks.

 

 

Before update

 

0 BEGIN PGM 1 INCH

1 TOOL CALL 1 Z S1200

2 CYCL DEF 7.0 DATUM SHIFT

3 CYCL DEF 7.1 X0

4 CYCL DEF 7.2 Y0

5 L X+0 Y+0 R F6298 M

6 L X-.551 Y+0 R F M03

7 CYCL DEF 1.0 PECKING

8 CYCL DEF 1.1 SET UP -0.1

9 CYCL DEF 1.2 DEPTH -0.4115

10 CYCL DEF 1.3 PECKG -0.4115

11 CYCL DEF 1.4 DWELL 0.

12 CYCL DEF 1.5 F100

13 L Z1.3615 R F M99

14 L Z1.2615 R F M

15 L Z+1.3 R F

16 L Y-.0208 R F

17 L Z+1.2 R F

18 L Z+1.0836 R F100

19 L Y+.049 R F

20 L X-1.653 R F

21 CC X-1.653 Y0.

22 C Y-.049 DR+ R F

23 L X-.551 R F

24 CC X-0.551 Y0.

25 C Y+.049 DR+ R F

26 L Y-.0208 R F

27 L Z+1.0058 R F

 

 

After Update

 

0 BEGIN PGM 1 INCH

1 CYCL DEF 1.0 PECKING

2 CYCL DEF 1.1 SET UP -0.1

3 CYCL DEF 1.2 DEPTH -0.4115

4 CYCL DEF 1.3 PECKG -0.4115

5 CYCL DEF 1.4 DWELL 0.

6 CYCL DEF 1.5 F100

7 L X-.551 Z1.3615 R F M99

8 L Z1.2615 R F M

9 TOOL CALL 1 Z S1200

10 CYCL DEF 7.0 DATUM SHIFT

11 CYCL DEF 7.1 X0

12 CYCL DEF 7.2 Y0

13 L X+0 Y+0 R F6298 M

14 L X-.551 Y+0 R F M03

15 L Z+1.3 R F

16 L Y-.0208 R F

17 L Z+1.2 R F

18 L Z+1.0836 R F100

19 L Y+.049 R F

20 L X-1.653 R F

21 CC X-1.653 Y0.

22 C Y-.049 DR+ R F

23 L X-.551 R F

24 CC X-0.551 Y0.

25 C Y+.049 DR+ R F

26 L Y-.0208 R F

27 L Z+1.0057 R F

[Paul Decelles]

Most likely due to your rpd_typ_v7$ setting. Try setting it to 0.

[IZN]

Thank you. That worked.