adding a G05 to every post...

[RDot604]

I am using mastercam X2. I need to add a G05 to the every post, but i want it to add automatically, so i dont have to do it for every tool every time i post...I know theres a way, but i cant figure out how...PLease help...Thanks

[Guest]

This thread should help you

 

Linky

[RDot604]

Bah, i didnt get much from that link. Im not very good with GCode, so i cant figure it out. Im gettin better, but not good enough to understand stuff like that...So if anybody could do it for me and send me the file back, then that would be awsome too....Any help is appreciated, so thanks john...

[Guest CNC Apps Guy 1]

Your reseller should be able to assist you with Post Processor tweeks such as this.

[Guest CNC Apps Guy 1]

Also, I's suggest a course in Manual CNC Programming at your local Community College to help with understanding G-Code. You don't necessarily need to be able to hand write a program from scratch but you should know the fundamentals about how they work. My local Community College has proved to be a VALUABLE resource in my continuing education.

 

The link provided above does everything but do it for you. It tells you what you need in your post, where you need to put it in 2 different styles of posts (MPFan and MPMaster) and some discussion related to how it works. Very imformative IMHO. If you can't follow along then it is definitely best that you seek the services of your local reseller.

 

Have a Great Day