O/T HSK 40 fixture

[Kyle Waters]

Hey all, would anyone happen to know where a good place to buy a fixture to hold HSK 40 taper tools? I want to mount the fixture to a tilt rotary table, and make a tool from a purchased blank. The company I am getting the blank from doesn't have anything....All input is appreciated.

Thanks!

[Justin Fore]

Guhring makes a HSK clamping system called GM300. A flange adapter should work well. They are available as a standard product. They are typically used as spindle adapters, but should work well for your application...they are very low profile.

 

The retention mechanism is manual...you use a set screw through the side of the adapter to clamp/unclamp the toolholder.

 

Justin

[Kyle Waters]

Thanks Justin