MC9 on XP64 Bit Machine

[m_morgan]

Hi!

 

I'm using X2 on my brand new 64 bit machine (bought specially to run vericut), but when I have to make changes to old programs done on MC9, I have to go to an old PC, which is a real hassle.

 

Is there a solution to using the USB hasp on an XP64 machine?

 

All help gratefully accepted!

 

Michael

[Guest]

Welcome to the the forum

 

 

MC9 on a 64 bit seems to be dicey at best, I think there are a few members who have gotten it to work and others who cannot.

 

Either way it is not supported by CNC

 

Why not just pull the existing V9 in X2 and modify and then repost it out of X2?

[Allan Brown]

Any new drivers for the HASP would be first available here:

 

http://www.aladdin.com/support/hasp/hasp4/enduser.asp

http://www.aladdin.com/support/hasp/enduser.asp

[Carl Hessig]

Always remove your hasp when updating mastercam.

We have been using 64bit for almost 2 years no problems

[m_morgan]

Thanks for the replies guys!

 

Nice to hear that it's possible to run V9 on XP64. I'll just have to fiddle with it a little more!

 

Michael

[Allan Brown]

Just for the record, I didn't say Mastercam would run... Just pointing out that HASP drivers for 64bit exist.