X2 Mr1 High Feed

[mpmcnc]

We recently installed MR1 on one of our computers and now I can no longer get the high feed to work. I write a surface finish contour and everything looks fine but as soon as I run it through high feed it add arcs all over the place and rapid moves thru the piece. It even cuts a boss that is outside my containment boundry. It starts about 3 inches above the boss and goes down in a circular motion (looks kind of like a tornado)until it gets down to the boss. Ive tried several different contours and they all do something really weird. As long as I dont run high feed they run fine. Is this just something funny with my file or are other people seeing problems with this?

[Jon Griffin CNC Software]

mpmcnc,

 

Please send the part to QC. We're working on cleaning out some longstanding bugs in highfeed, and something could have easily been broken in the process.

 

Thank you,

[Mike Whitten CAD/CAM Contractors]

Jon,

 

Please consider letting us use Highfeed with CRC wear. This is a must have.

 

Thanks!

 

Mike

[Jon Griffin CNC Software]

Michael,

 

This is an often requested enhancement and is definately being looked at, but I am not allowed to give a time frame on when it might appear.

[mpmcnc]

How do I go about sending the part to Qc.

 

Thanks.

[Mike Whitten CAD/CAM Contractors]

Thanks Jon!

 

Mike

[Mike Whitten CAD/CAM Contractors]

mpmcnc,

 

You usually create a z2g and send it to [email protected]

 

Mike

[mechman]

Hello, I am new to the High Feed toolpath option... I tried it today for the first time and the toolpath looked all messed up... Did a search and here I am... This is a surface rough pocket with high speed selected as the cut style. When I tried to run it through the high feed option it made a bunch of arc moves on the backplot... I don't know if I have something set wrong or if this is the same problem the previous post had... I will try some different toolpaths tomorrow.