chooks prob2spl.dll

[5kax]

Bonjour

 

Je voufrais savoir comment on utilise le chooks prob2spl.dll.

 

quelle format doit avoir le fichier d'entrèe ?

 

merci

[5kax]

Well you don't speak french.

 

Please I want to know how use the chooks prob2spl.dll.

 

Which format txt the entry files must be have.

 

Excuse me for my english !

[Piglet Trespassers William]

plain Ascii

Like

X10. Y5. Z2.5

X3. Y44. Z0

etc

0r

14.63861 -33.79797 0

26.04812 -33.5827 0

15.06916 30.78414 0

67.59594 26.90921 0

-25.4023 -5.381842 0

-71.47087 40.04091 0

or

some others ,but same as in File ->get ASCII

~~~~~~~~~~~~~~~~~~~~~`

Make some points ,save them as Ascii and see how

Mastercam does it

[Piglet Trespassers William]

Well you don't speak french.

~~~~~~~~~~~~~~~~~

You don`t speek Hebrew ,Polish and Russian ,so you better use English .

You are welcome

[Goldorak]

Haaaa je vois que je ne suis pas le seul francophone ici

 

bienvenu mec!!!!

 

 

for the others:

 

Haaaaa i see that im not the only one here to speek french

welcome abord!!!!

 

[5kax]

salut à toi axela 06

 

tu connais prob2spl.dll ?

[Goldorak]

non désolé

je n'utilise pas souvent les chook

[Piglet Trespassers William]

Looks like you have not learned how to answer to the answers of others and my answer was a waste of time .

I will remember you ,5kax

[5kax]

Dir sir william

 

you send a answer the 28th may end I Have'nt test your proposal in this day. Day of my question to axela06.

 

now i have test it, and want to say to you think for your answer. This CHOOKS works with :

 

14.63861 -33.79797 0

26.04812 -33.5827 0

15.06916 30.78414 0

67.59594 26.90921 0

-25.4023 -5.381842 0

-71.47087 40.04091 0

 

You can if you want write in this files the values for A and B

 

After transformation I don't know what i can do with the new files.

I know that i can load it in Mastercam like ascii files but after ???

 

if you have a idea. Think

[Piglet Trespassers William]

Mr 5kax !

How to use prob2spl

~~~~~~~~~~~~~~

Use this C-Hook to convert 3D (XYZ), 5D (XYZ AB), or 8D (XYZ AB UVW) probe center data into splines. This is useful for reverse engineering machine probe position data

~~~~~~~~~~~~~

 

Load it or merge it as ascii

In options select as splines

You will get your splines transformed to your actual position .

Now you can use it in your toolpath

 

HTH

BR

[5kax]

think a lot dear Sir william and have have a good day

[Piglet Trespassers William]

You are welcome ,5kax !