Post that outputs Macro stuff

[mcpgmr]

We have a Daewoo horizontal with the Fanuc 18i MB that runs certain parts all the time. These parts are similar in shape and size so the tooling is the same for all. My question is how hard woulsd it be to edit my post to out put Macro stuff for feeds, diameter comp and z depts? Here is a sample of what onr of the programs looks like. I want to be able to make this a turn key process without any editing outside of MX2. Notice ther is no prep codes or spindle or coolant commands. This stuff is all setup in the main program and the sample here is a sub program. Thanks in advance!

 

O0630 ( 10.7 10.5 NEWBERRY FLOATER )

( 2" FLAT ENDMILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - 2. )

N108 G0 X8.8432 Y-2.5312

N112 Z#601

N114 G1 Z#26 F#9

N116 G42 D99 X7.8575 Y-2.3621 F#9

N118 G2 X7.0266 Y-1.3765 R1.

N120 X7.041 Y-1.2075 R1.

N122 G3 X7.0952 Y-.8318 R7.1438

[Steve Biehl - Cimquest Inc]

tip # 1 - the pound sign (#) can not be output, you need to use the ascii value in the post, 35.

 

www.asciichart.com

[mcpgmr]

Thanks Steve! It's a start.

[Steve Biehl - Cimquest Inc]

tip # 2 - if outputing something with outputing the 'real' value, ie F#9, be sure to update the variable like it was output.

 

code:

---

plinout

pbld, ..., [if prv_feed <> feed, "F", 35, "9"]

!feed #update variable

---

[Guest]

awating tip 3

 

this is some good stuff..

 

 

pretty please? pretty please?