posting comments

[tobee1]

i have mx2 and for some reason i cant get the comments in toolpath to post in header and at the path location. if it matters, i'm on integrexes with a heavily modified mplmaster post.

[Guest]

Well the obvious question is, is the comment$ still in your posts or is it

 

#comment$

 

commented out

[tobee1]

why yes it is but when its put in pheader it takes out of the path and puts in in the header.

[Guest]

OK, so what is the purpose of placing it in the pheader section?

 

 

If you're trying to get notes into a program there are better ways of going about it.

 

The comment section and canned text sections can be dicey when they are tried to be used in the way I think you're trying to go.

[tobee1]

i use 'n'no's and comment$ for subs for easy restart finding. i want to post the comment$ at the top of program while still being located at toolpath position. i'm probably brainfarting but i've done it before in a different post but applying the same logic with mplmaster seems to be puzzling me.