Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

WARNING-YAXIS MOTION ENCOUNTERED


CNCGUY
 Share

Recommended Posts

Key guys,

 

I keep getting the following error when doing a C-Axis Cross Contour (no Y on the machine). What Im trying to do is engrave on the flats of hex stock. I can do it in 9, but not X. I am running a modified mplmaster control/machine def.

 

Cant figure out what I need to do to get it to post C rather than Y.

 

Y-AXISERROR.jpg

Link to comment
Share on other sites

Troy,

 

Have a look at this in your post

 

quote:

#Interpolation Output Settings

g107crad : 0 #0 = radius, 1 = diameter

g112address : 1 #0 = Y, 1 = C

Is G112 set at 1?

 

and this

 

quote:

#Machine axis switches, initial

y_axis_mch : no$ #SET_BY_MD - Machine has a Y axis, 0=no, 1=yes - Set based on Axis Combination in MD

Just guessing but worth a look.

 

Phil

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...